Allen Pull - Polished Brass
Member of the Trade? Log in Here
No Returns
Estimated ship date: 9/11/26
5 year warranty
Product Details
Dimensions
Shipping
Shop the Allen & Austin Collection
Available in 3 sizes
Installation
Installing your pulls is simple and takes just minutes. Follow our step-by-step guide for precise, polished results.
Step 1
Determine Placement
Using a tape measure, measure your pull’s center-to-center distance to confirm correct hole spacing. Then determine the pull orientation and ideal placement on each door or drawer.
Step 2
Mark the Surface
Apply painter’s tape and mark both drill points, ensuring the spacing matches your pull’s center-to-center measurement. Use a level to confirm both holes are perfectly aligned.
Step 3
Drill the Openings
Using a 7/32" drill bit, carefully drill both marked holes. Remove the tape once complete to reveal clean, ready-to-install openings.
Step 4
Install by Hand
Insert the appropriate screw (typically 1” for ¾” thickness) into the drilled holes. Attach the pull, rotate screw until hand-tight, then secure with a screwdriver.
